4: Adjusting The Image; Maximize Light Output; Calibrate Screen Brightness (Fl) - Christie CP2210 User Manual

4 Adjusting the Image
This section provides information and procedures for adjusting the cinema projector image.
4.1

Maximize Light Output

To ensure optimal operation and peak screen brightness, use LampLOC
you install a new lamp in the cinema projector. When you complete the LampLOC adjustment, the lamp is
centered and is the correct distance from the illumination system. Before running LampLOC, verify that
• The lamp is on and the douser is open.
• A white test pattern is selected.
1. On the TPC, tap Menu > Advanced Setup > LampLOC
2. Tap Do Auto.
4.2

Calibrate Screen Brightness (fL)

1. On the Touch Pad Controller, tap Menu >
Administrator Setup > Foot Lamberts
Calibration.
2. Complete t he Foot Lamberts Calibration
wizard.
CP2210 User Manual
020-100410-08 Rev. 1 (05-2014)
to adjust the lamp position whenever
™
Setup.
™
Figure 4-1 Footlamberts Calibration Wizard
4-1