Config 1 Window - Christie CP2210 User Manual

6.13.1 Config 1 Window

Use the Channel Setup: Config 1 window to change the channel configuration settings.
Table 6.8 Config 1 Window
Control
1: Icon
2: Input
3: Data Format
4: Source File
5: Screen File
6: Use PCF
7: PCF
8: Lamp File
9: ILS File
10: Auxiliary Lens
CP2210 User Manual
020-100410-08 Rev. 1 (05-2014)
1
2
3
4
5
Figure 6-13 Channel Setup: Config 1 Window
Description
The icon associated with the channel.
The location or connection for the current input.
The source type (8-10-12 bit) and whether or not it is packed.
The resolution and aspect ratio of the incoming source. To view a list of available sources,
6.14.6 Source File Setup Window, on page 6-31
see
The display area, masking, cropping and lens for the current input.
Selects a pre-defined cinema projector Configuration File (PCF) for the input and prevents Channel
adjustments.
The PCF file.
The lamp configuration associated with the channel. Click Launch Dialog to edit the lamp file
settings. Any changes made to the Lamp File settings are applied to all channels that use this lamp
file.
The ILS configuration associated with the channel. Click Launch Dialog to edit the ILS file settings.
Any changes made to the ILS File settings are applied to all channels that use this ILS file.
Indicates if the channel uses an anamorphic lens.
Section 6: Projector Menus
6
7
8
9
10
.
6-19