2: Installation And Setup; Cinema Projector Components - Christie CP2210 User Manual

2 Installation and Setup
This section explains how to install, connect, and optimize the cinema projector display.
2.1

Cinema Projector Components

The cinema projector includes these components:
Air Filter Cover and Air Filter
Filters the intake air before it circulates in the front compartment to cool the main electronics.
Douser
Closing the douser rotates a shutter blade in front of the illumination system and reduces lamp power to
conserve lamp life.
Adjustable Feet
Adjusts the tilting angle of the cinema projector.
Lamp Door and Lamps
Provides access to the lamp. The lamp door must remain closed and locked for normal operation. Lamp
replacement should only be performed by qualified technicians.
The cinema projector is designed to operate with 2.0kW, 1.8kW and 1.4kW lamps. See
tions for a complete list of available lamp types.
LED Status Indicators
Provide information about the status of the cinema projector. See
for information about cinema projector status.
Motorized Auxiliary Lens Mount
An optional auxiliary lens mount can be installed adjacent to the primary lens mount to provide motorized
positioning of a 1.25x Anamorphic lens or a 1.26 Wide Converter lens in front of the primary lens. The Wide
Converter lens zooms the image from flat to scope image formats. The Anamorphic lens horizontally spreads
the image back into its wider 2.39:1 scope image and is most typically used in side-masking theatres or on
larger screen sizes.
Projection Lens
A variety of lenses can be used with this cinema projector. See the
available lenses.
Security Locks
Prevent unauthorized access to cinema projector components
CP2210 User Manual
020-100410-08 Rev. 1 (05-2014)
Appendix A: Specifica-
5.4 Cinema Projector LED Status Indicators
Appendix A: Specifications for a list of
2-1