Operation; Turning The Projector On; Turning The Projector Off; Projector Power States - Christie CP2420-Xe Installation And Setup Manual

Operation

Learn how to turn the projector on and off. You can operate the projector from the remote UI or from
an optional touch panel.

Turning the projector on

Learn how to turn the projector on.
1. Turn on the circuit breaker for the projector.
2. Press and hold the Green Power icon.
3. To ignite the lamp, press and hold the Light Bulb icon.

Turning the projector off

Learn how to turn the projector off.
1. Press and hold the Light Bulb icon to turn the lamp off.
2. Press and hold the Red power icon.
The projector enters a cool-down mode and the fans and electronics stay on for 10 minutes.
After this cool-down period, the projector enters Standby mode.

Projector power states

Learn what occurs when you press the Power and Lamp icons.
Button pressed Projector's current state
— Enters Standby
power mode
(Solid yellow)
Power On Powers on to full
power (boot delay)
Power Off No action
Lamp On Power is on and
turns on the lamp
(boot delay)
Lamp Off No action
CP2420-Xe and CP4420-Xe Installation and Setup Guide
020-103555-01 Rev. 1 (03-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
Power is on and the Power is on and the
lamp is off lamp is off
(Flashing green) (Solid green)
No action No action
Powers off Turns the lamp off
immediately immediately; enter
cool-down mode
Immediately turns on No action
the lamp
No action Immediately turns
off the lamp
Cool-down mode
(Yellow/green
flashing)
Cancels cool down
and goes to full
power
No action
Cancels cool down
and immediately
turns on the lamp
No action
35