Installing The Cable Management Arm; Dismounting The Server - Sun Oracle SPARC T5120 Installation Manual

Installing the Cable Management Arm

The rackmounting kit for each server comes with the same cable management arm
(CMA) assembly. The CMA installation procedures are the same for both servers.
See
Related Information
"Installing the Cable Management Arm for Both Servers" on page 30
■
"Connecting the Server Cables for Both Servers" on page 37
■
"Managing Cables With the CMA" on page 42
■

Dismounting the Server

Caution – To prevent damage to your server, do not move the rack while the server
is mounted.
To install or replace internal parts in the server, you must first remove the server
from the rack. For the removal procedure, refer to the SPARC Enterprise T5120 and
T5220 Servers Service Manual.
Related Information
Sun SPARC Enterprise T5120 and T5220 Servers Documentation
■
Sun SPARC Enterprise T5120 and T5220 Servers Service Manual
■
86 SPARC Enterprise T5120 and T5220 Servers Installation Guide • October 2010
"Installing the Cable Management Arm for Both Servers" on page 30.