Sun Oracle SPARC T5120 Installation Manual page 64
Hide thumbs
Also See for SPARC T5120:
- Administration manual (70 pages) ,
- Getting started manual (6 pages)
Table of Contents
Advertisement
...
Federal Acquisitions: Commercial Software -- Government Users
Subject to Standard License Terms and Conditions.
...
Warning: password is set to factory default.
-> set /SP/users/root password
Enter new password: ********
Enter new password again: ********
->
Note – After the root password has been set, on subsequent reboots, the ILOM CLI
login prompt is displayed.
2. Enter root for the login name followed by your password.
...
hostname login: root
Password: password (nothing displayed)
Waiting for daemons to initialize...
Daemons ready
Integrated Lights Out Manager
Version 2.0.0.0
Copyright 2007 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
->
Related Information
"Configure the Service Processor Network Management Port" on page 55
■
Sun SPARC Enterprise T5120 and T5220 Servers Documentation
■
Sun SPARC Enterprise T5120 and T5220 Servers Administration Guide
■
54
SPARC Enterprise T5120 and T5220 Servers Installation Guide • October 2010
Advertisement
Table of Contents
Need help?
Do you have a question about the SPARC T5120 and is the answer not in the manual?