Configuring The Host Software; Cabling Notes For Both Servers - Sun Oracle SPARC T5120 Installation Manual

3. Commit the changes to the service processor network parameters. See
"Power On the System for the First Time" on page
4. Power on the server from a keyboard using the ILOM software.
Related Information
"Power On the System" on page 59
■

Configuring the Host Software

1. Configure the Solaris OS. See
The Solaris OS is preinstalled on the servers. When you power on, you are
automatically guided through the Solaris OS configuration procedure.
2. Install any required patches to the server.
Refer to the SPARC Enterprise T5120 and T5220 Server Product Notes for a list of
required patches.
3. Load additional software from the Solaris media kit (optional).
The Solaris media kit (sold separately) includes several CDs containing software
to help you operate, configure, and administer your server. Refer to the
documentation provided with the media kit for a complete listing of included
software and detailed installation instructions.
Related Information
"Cabling Notes for Both Servers" on page 10
■
Sun SPARC Enterprise T5120 and T5220 Servers Documentation
■
Sun SPARC Enterprise T5120 and T5220 Servers Product Notes
■

Cabling Notes for Both Servers

Minimum cable connections for the servers:
■
■
■
10 SPARC Enterprise T5120 and T5220 Servers Installation Guide • October 2010
At least one system on-board Ethernet network connection (NET port)
The service processor serial management port (SER MGT port)
"Boot the Solaris Operating System" on page
Step 3
47.
in
64.