Managing Cables With The Cma; Secure The Server Cables In The Cma - Sun Oracle SPARC T5120 Installation Manual

Caution – The server goes into Standby mode and the service processor initializes as
soon as the AC power cable is connected to the power source.
●
Go to
on connecting the server to AC power.
Related Information
"Powering On the System for the First Time" on page 45
■

Managing Cables With the CMA

Managing the cables with the CMA is the same for both servers.
"Secure the Server Cables in the CMA" on page 42
■
Related Information
"Secure the Server Cables in the CMA" on page 42
■

▼ Secure the Server Cables in the CMA

●
Once the server cables are connected and placed inside the CMA, open the
velcro cable straps and wrap the straps around the CMA securing the cables
inside the CMA.
42 SPARC Enterprise T5120 and T5220 Servers Installation Guide • October 2010
"Powering On the System for the First Time" on page 45 for instructions