Sun Oracle SPARC T5120 Installation Manual page 7

▼
Avoid Booting the Solaris Operating System at Startup 65
▼
Reset the System 65
▼ Power Cycle the System 66
Verifying System Functionality 67
Updating the Firmware 69
flashupdate command 69
▼ Update the Firmware 70
Selecting a Boot Device 73
Selecting a Boot Device 73
▼ To Select a Boot Device 74
Installing the Servers With the Express Rail Rackmounting Kit 75
Slide Rail Assembly Notes for the Express Rail Rackmounting Kit 76
Installing the Servers in a Rack With Express Rails 78
▼ Install the Slide Rail Assemblies 78
▼ Insert and Lock the Server in the Rack 83
Installing the Cable Management Arm 85
Dismounting the Server 86
Assembling and Installing DC Power Cables for the Sun SPARC Enterprise
T5120 Server 87
Requirements for Servers With DC Input Power 87
DC Supply and Ground Conductor Requirements 88
Overcurrent Protection Requirements 89
Assembling and Installing the DC Input Power Cables 89
▼ Assemble the DC Input Power Cables 90
▼
Install the Strain Relief Housings 95
▼
Connecting the DC Input Power Cords to the Server 98
Contents vii