Table of Contents
Advertisement
GLOBAL SETTINGS
Case Conversion
This feature allows conversion of the case of all alphabetic characters to upper or lower
case.
$CLFCA00
Case Conversion = Convert to upper case
$CLFCA02
Character Conversion
Character conversion is an eight byte configuration item. The eight bytes are 4 character
pairs represented in hexadecimal ASCII values. The first character in the pair is the char-
acter that will be converted. The second character in the pair is the character to convert
to. If the character to convert in a pair is FF, then no conversion is done. See
"References" for more detailed programming instructions.
Configure Character Conversion
$CLFCH
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start
again at the beginning.
NOTE: Case conversion affects ONLY scanned bar code data, and does not
affect Label ID, Prefix, Suffix, or other appended data.
0xFFFFFFFFFFFFFFFF
(no character conversion)
ENTER/EXIT PROGRAMMING MODE
Case Conversion = Disable (no case conversion)
$CLFCA01
Case Conversion = Convert to lower case
To configure, scan the ENTER/EXIT PROGRAMMING
MODE bar code above, then the bar code at left fol-
lowed by the digits from the Alphanumeric charac-
ters in
Appendix D, Keypad
desired character(s). End by scanning the ENTER/
EXIT bar code.
CANCEL
page 291
representing your
PRODUCT REFERENCE GUIDE
in
83
Advertisement
Table of Contents
