ENTER/EXIT PROGRAMMING MODE
Case Conversion
This feature allows conversion of the case of all alphabetic characters to upper or lower
case.
$CLFCA00
Case Conversion = Convert to upper case
$CLFCA02
Character Conversion
Character conversion is an eight byte configuration item. The eight bytes are 4 character
pairs represented in hexadecimal ASCII values. The first character in the pair is the char-
acter that will be converted. The second character in the pair is the character to convert
to. If the character to convert in a pair is FF, then no conversion is done. See "
Conversion" on page 164
Configure Character Conversion
$CLFCH
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start
again at the beginning.
48
QUICKSCAN™ I QD2200
NOTE: Case conversion affects ONLY scanned bar code data, and does not
affect Label ID, Prefix, Suffix, or other appended data.
for more detailed programming instructions.
0xFFFFFFFFFFFFFFFF
(no character conversion)
Case Conversion = Disable (no case conversion)
$CLFCA01
Case Conversion = Convert to lower case
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar
code at left followed by the digits from the Alphanu-
meric characters in
Appendix D, Keypad
ing your desired character(s). End by scanning the
ENTER/EXIT bar code again.
CANCEL
DATA FORMAT
Character
represent-