Table of Contents
Advertisement
LX9000 Version 2.6
September 2011
10.5.3 Adjusting the Compass Module
The compensation of the compass is carried out in the setup/hardware/compass screen:
1. Orient the glider to face north. The N label will be automatically highlighted.
2. Stabilise the reading and press SET to save the correction for this direction.
3. Rotate the glider 45° to the right. The highlight on the label will move to NE.
4. Stabilise the reading and press SET to save the correction for this direction.
Page 126 of 130
Advertisement
Table of Contents
