Compass; Rear Seat Or Front Seat - LXNAV LX90xx User Manual

LX90xx system Version 4.0
6.1.12.7

Compass*

When a compass is connected to the system calibration is crucial for correct operation.
Refer to compass manual for more info about installation and its calibration.
6.1.12.8

Rear Seat or Front Seat

In a two-seat configuration with the rear seat device it is possible to transfer selected data
between the front and rear seat device.
automatically received from the other device.
Data are divided into two groups; flight parameters and navigational data. If a specific
value is checked this value will be automatically received from the other device.
Check MacCready, Ballast or Bugs to receive current MacCready value, current ballast
setting or bugs from other device.
If the Waypoint checkbox is checked a new waypoint target will be automatically assigned
when the user changes the waypoint target on other device. The message
received" will be displayed on the screen and you will be navigating to the same waypoint as
other device. Please note that it is not necessary to have this waypoint in your databases as
the complete waypoint information is transferred.
If the Waypoint checkbox is not checked it is still possible to send a target to the other
device using the SEND action in waypoint mode.
The same applies to the Airport checkbox.
displayed.
If the Task checkbox is checked the task will be synchronised with the other device.
Use this menu to define which data will be
The message
Page 71 of 151
February 2014
"Waypoint target
"Airport target received"
is