Table of Contents
Advertisement
LX9000 Version 2.6
4.1.2
Portrait orientation
VOLUME selector
Ambient light
sensor
ZOOM selector
The vario unit is an indicator only and has no controls. Information displayed is
controlled by the LX9000 digital unit.
4.1.3
Buttons
All buttons have a dynamic function; the first time one presses each button, it displays its
function without executing any action. Not all buttons have a function on every page. In
some cases buttons have a long press function.
4.1.3.1
Power Button
The power button is marked with the ON/OFF symbol. It has multiple functions. Primarily it
is used to switch the LX9000 system on and off.
4.1.4
Rotary Switches (Knobs)
The LX9000 has four rotary knobs. Each has a single function with the exception of the
zoom knob which has, in some cases, a function other than zoom. With the upper-left rotary
knob the volume can be adjusted. The upper-right rotary switch is the mode selector (it
changes the mode of the operation). At the lower-right is the up/down switch which is used
for selecting sub-pages, sub-menus and editing menus. At the lower-left is the zoom knob
which is multifunctional. While its main function is to change the zoom level within graphic
mode, it can also be used if an error is made during editing; it is possible to move the cursor
back by rotating this knob. However this can only be done if 'editing' is active which is
shown by the cursor blinking.
Page 13 of 130
September 2011
MODE selector
POWER button
SD Card reader
PAGE selector
Advertisement
Table of Contents
