Managing Airports - LXNAV LX9000 User Manual

LX9000 Version 2.6
Multiple files can be selected. All checked files will be shown on the graphics page and used
in the near mode calculation, if the way point is of the proper type (airport or outlanding
place). However, only one file can be the active file.
creation.
Press the ACTIVE button to mark the selected file as active.
Press the DELETE button to remove the selected file from the LX9000.
Press the SAVE button to save way points to the SD Card or USB stick. The save dialogue
will be opened.
Change the filename if required. Press TO USB for saving to the USB stick or press TO SD
for saving to the SD card. When the compatibility mode flag is checked the file will be saved
in DA4 format, which can be used with older LX devices (LX20, Colibri, LX5000, and LX7000).
CUP and DA4 also stores tasks. Tasks will also be uploaded to the LX9000. This
feature is very useful, if you wish to prepare tasks on a computer using SeeYou or
a similar program. You can subsequently easily select a task via the Task->Edit-
>Load option. See Chapter 5.7.6 for more details.
5.1.5.5

Managing Airports

Select the Airports menu item and press the SELECT button. A list of all available airport
databases will be shown. Only distributed airport databases are shown in this menu; the
Page 30 of 130
September 2011
The active file is used for task