Table of Contents
Advertisement
LX9000 Version 2.6
4.2 Switching on the Unit
After a short press of the power-on button the LX9000 and vario units will turn on and a
welcome screen will appear. The first screen shows the boot loader screen followed by the
Linux kernel screen and then the file system screen.
The boot procedure normally takes up to 20 seconds but in the case of a firmware update or
system check it can take more time. The final boot screen displays information about the
LX9000 firmware and the IGC serial number. When the boot procedure is completed the
profile selection dialogue is shown.
starting up the LX9000.
4.3 User Input
The LX9000 user interface consists of many dialogues which have different input controls.
They are designed to make input of names, parameters, etc., as easy as possible. Input
controls can be summarised as:
•
Text editor
•
Masked text editor
•
Spin controls
•
Selection control
•
Checkboxes
•
Colour selector
•
Line width selector
To move the function from one control to another, rotate the lower-right knob (page
selector) as follows:
•
Clockwise rotation will select the next control.
•
Anticlockwise rotation will select the previous control. Press the SELECT button (usually
lower-right) to enter control input.
Please refer to Chapter 7.1 for more details about
Page 14 of 130
September 2011
Advertisement
Table of Contents
