Table of Contents
Advertisement
LX9000 Version 2.6
5
Operating Modes
The LX9000 has seven modes or main menus. All of them are selectable by rotating the
upper-right knob which is also called MODE selector. The diagram below shows the mode
structure of the LX9000.
•
Airport Mode, navigation and selection airports.
•
Way Point Mode, navigation, selection and editing way points.
•
Task Mode, Navigation, selection and editing task.
•
Statistics Mode shows statistical data for flight in progress or logbook.
•
Setup mode is used to configure the LX9000.
•
Information Mode displays GPS status, altitude, flight level and height, sunrise and
sunset or position report to selectable point or satellite sky view.
•
Near Mode displays a list of all landable way points and airports.
The Navigation modes and statistics mode have additional pages which are accessible by
rotating the bottom-right knob also called the PAGE selector.
Three main navigational modes airport, waypoint and task mode are selected by rotating
the upper-right knob. All three options are similar and have similar basic navigation data
screens accessed by rotating the bottom-right knob.
It is possible to fully customise all three main navigational pages using the
program LXStyler. This program can be downloaded from our webpage
www.lxnav.com. Refer to Chapter 5.1.14 for more details.
Page 20 of 130
September 2011
Advertisement
Table of Contents
