Table of Contents
Advertisement
LX9000 Version 2.6
5.7.6
Loading a Task
It is possible to load a task from the stored tasks within the active way point file. Select the
LOAD action within task mode. A dialogue with a list of all stored tasks will be shown.
Total task distance, task description and task points are shown for each task stored. Select
the desired task by rotating the lower-right knob and press LOAD. The task will be loaded
into the active task and the task edit dialogue will be opened.
It is also possible to delete tasks from the active way point file. Press the DELETE button to
delete the selected task.
Tasks can be sorted by start point, task distance and task description. Press the SORT
button to toggle the sort method.
5.7.7
Moving a Task Point
If at least one observation zone is defined as an assigned area, it is possible to move a point
within this area. Moving a point will increase or decrease the total task length. Select the
MOVE action within task mode. A dialogue with the current assigned area will be shown.
Page 92 of 130
September 2011
Advertisement
Table of Contents
