Table of Contents
Advertisement
LX9000 Version 2.6
5.1.4
Display
The display menu controls screen brightness. The LX9000 has an ambient light sensor which
detects ambient light and automatically increases or reduces the brightness of the screen.
If the Automatic brightness checkbox is selected, the instrument will automatically adjust
brightness according to current light conditions. Minimum and Maximum brightness
items control value limits.
conditions or darker conditions will occur. Default values are tuned to human eyes and do
not require change.
Night mode brightness defines maximum brightness when instrument is operating in
night mode. In night mode, brightness is reduced to very low value to reduce difference
between ambient light and device backlit.
If you want to set the brightness manually uncheck the Automatic brightness control and
set the brightness manually.
Change Display orientation if you would like to change the LX9000 screen orientation.
The LX9000 will restart and start with new screen orientation.
It is recommended that the automatic brightness control is always enabled.
Reducing brightness will also reduce power consumption. See technical data for
more details (Chapter 3.1.5).
Use time values to setup how fast adaptation to brighter
Page 26 of 130
September 2011
Advertisement
Table of Contents
