Table of Contents
Advertisement
LX9000 Version 2.6
5.1.9
Optimization
During flight the LX9000 optimises the flown path according to OLC or FAI rules. Use this
dialogue to change the way instrument performs this optimisation.
Number of points defines the type of optimisation. Use five for OLC optimisation. It will also
take into account reduced distances for the last two legs. Use the value three for FAI free
flight optimisation.
Optimisation will not take into account the 10 km distance between turn points
which is required by FAI rules.
The FAI triangle group defines the rules for FAI triangles and these rules can bend a little if
you do not want to fly marginal triangles.
5.1.10 Warnings
There are three types of warnings available.
approaching a particular airspace zone. Altitude warnings are shown when approaching to a
defined altitude and Flarm warnings are triggered when conflicting traffic is in the vicinity.
Use this dialogue to setup the behaviour of warnings.
Airspace warnings are shown when
Page 45 of 130
September 2011
Advertisement
Table of Contents
