Table of Contents
Advertisement
LX9000 Version 2.6
5.5.4
Button Actions
When any of the eight buttons are pressed, the functions for the buttons are shown. If a
selected button is pressed once more the selected action will take place.
Press the MORE>> button to see more options.
behaviour is slightly different. When the check button is pressed on the remote stick a menu
will appear instead of the button functions.
By using the UP/DOWN key the pilot may select between options.
Button functions or the remote menu will disappear automatically after 10 seconds
if no further action is taken.
In airport mode the following selections are available:
•
Select option is used to select an airport as the new navigational target.
•
Mc/Bal will set MacCready, ballast and bugs (see Chapter 5.5.4.2 for more details).
•
Map item is used to quickly modify map parameters.
•
Wind will open a dialogue where wind changes with altitude are shown, wind can be set
and methods for wind calculation are shown.
•
Airspace shows a list of airspace zones in the vicinity of the current position.
•
Mark is used to mark the current position and create a way point.
•
Flarm will display a list with all visible Flarm objects. You can select one and use it for
navigational purposes.
If the remote stick is available the
Page 72 of 130
September 2011
Advertisement
Table of Contents
