Table of Contents
Advertisement
LX9000 Version 2.6
•
Rot.FAI will rotate the FAI area if it is enabled. This option is not shown if it is not
enabled.
•
Event is used to log an event. The recording rate will be increased to 1 second for one
minute. A message
•
Send is available only when we have a two-seat configuration with a LX9000D. Press
this button to send the current navigational point to the rear seat device. This action will
force a change of navigational target for the selected navigation mode on the rear seat
device.
•
Night will reduce backlight to level acceptable for flying in very dark conditions.
•
Off will switch off the instrument. The message
will be displayed.
The LX9000 can also be powered off by presssing the upper-left button until the
message "switching off" appears.
5.5.4.1
Select an Airport
There are two methods of selecting: filter mode and list mode. You can toggle between
these two modes by pressing the LIST or FILTER buttons. Selecting an airport in filter
mode is straightforward. Enter the first letter of the airport name using the lower-right
knob. The helper will show the first airport matching this letter and the next few airports will
be displayed in lower part of screen.
"Event marked"
will be displayed on the screen.
Page 73 of 130
LX9000 is shutting down. Please wait.
September 2011
Advertisement
Table of Contents
