Table of Contents
Advertisement
Rev #17
•
2xSMA for flarm antenna (US version has reverse polarity SMA)
•
1xSMA for ADSB antenna
Default baud rate of PowerMouse is set to 19200bps. In case, that you have any
problems with Flarm indicator (FlarmView), please check baud rate setting on it.
3.1.3 Flarm antenna color coding
Red marked antenna is for Europe (868.2Mhz)
Blue marked antenna is for USA, CANADA, Australia (915MHz)
Green marked antenna is for USA with reverse polarity SMA (915MHz) – FCC approved
3.1.4 Options
One or more external Flarm Displays can be connected (FlarmView/FlarmLED)
3.1.5 Technical Data
•
Power input 8-36 V DC
•
Consumption 1.02W (85mA @12V) excl. power for USB stick
•
Weight 160 g
•
55mm x 90mm x 25mm
3.2 ADS-B module
PowerMouse device has a possibility to have an internal ADSB module, which is the ADSB IN module.
All four variants can have the ADSB.
ADS-B module is not a standard part of the PowerMouse, therefore when ordering you have to order
PowerMouse with ADSB.
ADS-B
can receive MODE S transponders with ADS-B OUT. You will see all traffic equipped with
mode S transponders.
ADS-B module can be retrofitted into PowerMouse units without it (except for serial
numbers from 1-100).
Version 1.18
Page 8 of 22
November 2019
Advertisement
Table of Contents
