Table of Contents
Advertisement
LX9000 Version 2.6
September 2011
The LX9000 and TRX-1090 are now ready for operation. On the info page you should see
the TX sign and number of received objects.
10.4 AHRS
The LX AHRS system is designed for VFR use only. These instruments are not intended for
use in type certificated aircraft. LXNAV makes no claim as to the suitability of its products in
connection with FAR 91.205.
10.4.1 Installation
AHRS shall be installed as close as possible to aircraft center of gravity. It should be leveled
with wings and fuselage as much as possible. Take care of flying direction label on the top of
AHRS box. Small adjustments (few degrees) can be later corrected through AHRS setup
menu.
Connect total pressure and static pressure to corresponding pressure connectors on AHRS
module.
If total pressure is not connected, AHRS will not work properly.
Connect AHRS and main unit using supplied USB cable.
Page 122 of 130
Advertisement
Table of Contents
