LX9000 Version 2.6
5.1.7
Sounds*
In the Sounds setup page audio settings for the vario unit, voice settings for the LX voice
module and alarms settings for the vario unit can be modified.
5.1.7.1
Audio Settings*
Basically here we can set up two types of audio; audio sound for climb mode and another for
cruise mode (SC).
Vario audio mode has the following options:
•
Linear positive: sound is interrupted with silence every few milliseconds when the
needle is positive; on negative side sound is linear (not interrupted).
•
Linear negative: inverse function to Linear positive.
•
Linear: sound is linear and non interrupted in full scale range.
•
Digital positive: similar to Linear positive, except frequency is not changing linearly
but with larger steps.
•
Digital negative: inverse function to Digital positive.
•
Linear positive only: sound is present only at positive values, for negative values there
is silence.
•
Digital positive only: similar function to Linear positive only, except the sound is
similar to the digital tone.
Press the DEMO button to hear the selected option.
Page 40 of 130
September 2011