Typical Systems - Raymarine a65 Installation And Operation Instructions Manual

3.7 Typical systems

The illustrations below show examples of possible system configurations, for more details on compatible devices please refer to the
System integration section.
Note: In the examples below the multifunction display(s) could be any of the following:
• New a Series
• New c Series
• New e Series
Example: Basic system
1
hs
SeaTalk / RayNet
1. Raymarine Multifunction display.
2. Raymarine network switch.
3. Raymarine radar scanner.
4. SPX course computer.
5. SeaTalk ng Pilot controller.
Note: A network switch is only required if multiple devices are connected using SeaTalk
Example: Basic system with SeaTalk equipment
1
hs
SeaT alk / RayNet
1. Multifunction display
2. Network switch.
3. Radar scanner.
4. SPX course computer.
5. SeaTalk pilot controller.
6. SeaTalk to SeaTalk ng converter.
Note: A network switch is only required if more than one device is connected using SeaTalk
Planning the installation
2
hs
SeaT alk / RayNet
SeaT alk
2
hs
SeaT alk / RayNet
SeaT alk
3
ng
hs / RayNet.
3
ng
hs / RayNet.
4 5
SMART
4 5
SMART
6
D12245-2
D12246-2
29