System Set-Up Menus - Raymarine a65 Installation And Operation Instructions Manual

25.7 System set-up menus

The system set-up menus enable you to configure your display and connected external devices.
The following menus are available:
Menu item
Alarms
Pilot Controls
Fuel Manager
Audio Controls
Ground Trip Resets
System Settings
Maintenance
262
Description
Enables you to configure all the different types of alarms
produced by the display and connected equipment.
Displays the Pilot Control dialog.
Displays the Fuel manager page
Displays the audio controls pop-up.
Note: Not available on New c Series displays.
Resets the chosen ground trip distance counter to zero.
Enables you to configure the settings for external devices
connected to the display.
Provides diagnostic information. Also enables you to
designate the data master and reset the display to factory
settings.
Notes
Only available when a Raymarine autopilot is detected on
the system and Autopilot Control is set to On.
Only available when connected to an audio device via
bluetooth.
New a Series / New c Series / New e Series