Controls Overview - Raymarine a65 Installation And Operation Instructions Manual

Icon Description
Rear-view mode — image is flipped horizontally.
Zoom setting: 2x zoom.
Zoom setting: 4x zoom.
Single active controller on network.
Multiple active controllers on network.
PC / laptop detected on network.
Point mode enabled.
Point mode disabled.
Stabilization Off.
Stabilization On.
FFC (Flat Field Correction)
Periodically the camera will perform a Flat Field Correction (FFC).
This will fine tune the thermal image to suit the current ambient
temperature.
The FFC operation is indicated by a momentary pause and a green
rectangle displayed in the upper left of the thermal video image.
Using the thermal camera application

19.3 Controls overview

The thermal camera application is available on compatible
Raymarine multifunction displays and systems. It includes controls
for the thermal camera.
Thermal camera application – hardkey controls
Rotary control Zoom image in / out.
Joystick / trackpad • Pan and tilt camera
Note: On touchscreen displays you can
also use the touchscreen to pan and tilt
the camera.
• Navigate menus
OK Confirm menu selection
CANCEL / Back Cancel selection
RANGE IN / OUT Zoom image in / out.
Thermal camera application menu.
The following menu options are available in the thermal camera
application.
Activate Camera
Pause Image
Camera Home
Image Options
Adjust Contrast
Standby
Camera Set-up
Brings the thermal camera out of
standby mode. (only available when
camera is in standby.)
• On
• Off (default)
Select to return the camera to its home
position.
Select to display the Image Options
sub-menu.
• Color
• Scene
• Thermal / Visible
• Reverse video
• Rear View
• Surveillance
Select to display the Adjust Contrast
sub-menu.
• Contrast
• Brightness
• Color
Select to place the camera in to
standby mode. (only available when
camera is activated.)
Select to display the Camera Set-up
sub-menu.
• Set Home Position
• Slew Settings
• Align Camera
• Elev Align:
• Surveillance Settings
• Default Color
• Icon Level
• Stabilization Mode
• Point Mode
• Ball Down Mode
• High Power Standby
• High Power Torque
221