Raymarine a65 Installation And Operation Instructions Manual page 136

Cartography set-up menu options
The following table describes the various options in the Cartography Set-up Menu for your multifunction display.
Menu item
Chart Display
Chart Grid
2D Shading
Community Layer
Chart Text
Chart Boundaries
Spot Soundings
Safety Contour
Depth Contour
Deep Water Color
Hide Rocks
Nav. Marks
136
Description
Determines the level of detail shown on the chart.
Determines whether grid lines representing longitude and latitude are
displayed on the chart:
• Off — grid lines are NOT displayed.
• On — grid lines are displayed.
If supported by your chart card, determines whether terrain shading is
displayed in 2D view.
Determines whether community layer is enabled or disabled.
With the community layer turned on, in addition to the standard
cartography you will be able to see User Generated Content (UGC).
The community layer contains:
• Modified chart objects — identified by a blue box containing 3 dots.
• Added chart objects — identified by a green box containing a plus
symbol.
• Deleted chart objects — identified by a red box containing a cross
symbol.
UGC data can be downloaded from the Navionics web store and
stored on your Navionics chart card.
Determines whether chart text is displayed (place names and so on).
• Off — chart text is NOT displayed.
• On — chart text is displayed.
Determines whether a line indicating the chart boundary is displayed.
• Off — chart boundary is NOT displayed.
• On — chart boundary is displayed.
Determines whether a number indicating depth is displayed.
• Off — depth is NOT displayed.
• On — depth is displayed.
The chart will use this depth as the deep water boundary. Water
areas of depth greater than this will be colored using the appropriate
Deep Water Color.
The depth contour is shown on the chart display as a line indicating
the depth at a particular position.
Determines the color used to shade areas of deep water. (The depth
used to determine areas of deep water is specified by the Safety
Contour setting)
Determines whether rocks are displayed in the chart application.
Determines whether navigation marks are displayed on the chart:
• Off — navigation marks are NOT displayed.
• On — navigation marks are displayed.
Options
• Simple
• Detailed (default)
• Extra Detailed
• Off
• On (default)
• On
• Off
• On
• Off
• Off
• On (default)
• Off
• On (default)
• Off
• On (default)
• Off
• 7 ft
• 10 ft
• 16 ft
• 20 ft
• 33 ft
• 66 ft (default)
• Off
• 16 ft
• 20 ft
• 33 ft
• 66 ft
• All (default)
• White (default)
• Blue
• Off (default)
• On
• Off
• On (default)
New a Series / New c Series / New e Series