Raymarine a65 Installation And Operation Instructions Manual page 155

VRM/EBL context menu
The VRM/EBL function includes a context menu which provides
positional data and menu items.
The context menu provides positional data of the VRM/EBL in
relation to your vessel:
• Range
• Bearing
The context menu also provide the following menu items:
• Float Centre
• Adjust
• VRM/EBL Off
Accessing the context menu
You can access the context menu by following the steps below.
1. New e Series or New c Series:
i. Selecting a location or the relevant object on-screen and
pressing the Ok button.
2. Touchscreen multifunction displays:
i. Selecting and holding on a location or relevant object
on-screen.
Creating a VRM/EBL on the radar display
To create a VRM/EBL on a touchscreen multifunction display follow
the steps below:
From the radar application:
1. Select and hold on the screen.
The radar context menu is displayed.
2. Select Place VRM/EBL.
3. Select the required location / target.
The VRM/EBL is now set at the selected location.
Creating a VRM/EBL on the radar display
From the radar application:
1. Select a target or location on screen.
2. Press the Ok button.
The radar context menu is displayed.
3. Select Place VRM/EBL.
4. Using the Joystick adjust the VRM/EBL to the required bearing
and range.
5. Press the Ok button to save the setting.
Creating a floating VRM/EBL on the radar
display
To float a VRM/EBL on a touchscreen multifunction display follow
the steps below:
From the radar application with a VRM/EBL already created:
1. Press and hold on the VRM/EBL.
The VRM/EBL context menu is displayed.
2. Select Float Center.
3. Select the desired location for the center position.
The VRM/EBL is placed at the new location.
Creating a floating VRM/EBL on the radar
display
From the radar application with a VRM/EBL already created:
Using radar
1. Position the cursor over the VRM/EBL.
2. Press the Ok button.
The radar context menu is displayed.
3. Use the Rotary Control to select Float Center.
4. Press the Ok button.
5. Using the Joystick, move the center position of the circle to
the desired position.
6. Press the Ok button to confirm the new position.
Unfloating a VRM/EBL on the radar display
To re-center a VRM/EBL on a touchscreen multifunction display
follow the steps below:
From the radar application:
1. Position the cursor over the VRM/EBL.
The Radar context menu is displayed.
2. Select Center.
Unfloating a VRM/EBL on the radar display
From the radar application:
1. Position the cursor over the VRM/EBL.
2. Press the Ok button.
The VRM/EBL context menu is displayed.
3. Select Center.
Using the radar range rings
Radar range rings enable you to measure the distance between
two points on the radar display.
Use the range rings to gauge the approximate distances between
points. Range rings are concentric circles displayed on the screen
and centred from your vessel at pre-set distances. The number and
spacing of the rings changes as you range in and out.
Examples:
D12214-1
Range — 1/4 nm Range — 3/4 nm
Range Rings — 760ft Range Rings — 1/4 nm
apart apart
Enabling and disabling radar range rings
From the radar application:
1. Select MENU.
2. Select Presentation.
3. Select Range Rings.
Selecting Range rings will switch the range rings On and Off.
D12215-1 D12216-1
Range — 1 1/2 nm
Range Rings — 1/4 nm
apart
155