Raymarine a65 Installation And Operation Instructions Manual page 197

Customizing datapage content
From the data application:
1. Select Menu.
2. Select Edit Page.
3. Select the cell you want to change.
4. Select Select Data Category.
5. Select a data category.
Selecting a data category will display a list of data items for
that category.
Depending on connected devices the categories of data available to display in the data application, data overlay, databar, and expanded
databar are shown below.
The following table shows the data items available by category.
Data Category Description
Boat Types of data generated
by your vessel. For
example, tank levels.
Depth Depth data.
Distance Types of data related to
distance travelled by your
vessel. For example, trip
distance.
Engine Types of data generated
by engines. For example,
oil pressure.
Using the data application
6. Select the data item you want to display.
Once selected a tick will be placed next to the data item in the
menu and the cell on screen will display the new data item
7. Repeat steps 3 to 6 for all the data items you want to change.
List of data items
Data Item Digital
Fresh Water
Grey Water
Black Water
Live Well
Trim Tabs (Only available
in the Data application.)
Depth
Log & Trip
Log
Trip
Ground Log, Trip
Ground Log
Ground Trip 1
Ground Trip 2
Ground Trip 3
Ground Trip 4
RPM
Coolant Temperature
Coolant Pressure
Oil Pressure
Boost Pressure
Alternator
Engine Load
Engine Hours
Engine Tilt
Dial Graphical
197