Raymarine a65 Installation And Operation Instructions Manual page 227

High Power Torque This option controls the
amount of power used to
hold the camera steady
when in use. With the
setting enabled the
camera will consume
more power, but will
help ensure that the
camera is held in place
in rough seas. The High
Power Torque mode
may be useful for power
boats that operate at
higher speeds and
experience high impact
environments, and can
accept higher power
consumption.
JCU Icon Shows or hides
the on-screen JCU
connected icon.
PC Icon Shows or hides the
on-screen PC connected
icon.
Restore Factory Enables you to restore
Defaults the camera's settings to
factory default values.
The calibrate platform
Calibrate platform
option re-initializes the
pan and tilt mechanism
in the thermal camera.
High power and high torque modes
Camera State Camera setting
• High Power Mode
Standby
ON
• High Torque Mode
ON
Standby • High Power Mode
OFF
• High Torque Mode
ON
Standby • High Power Mode
ON
• High Torque Mode
OFF
Awake • High Power Mode
OFF
• High Torque Mode
OFF
Awake • High Power Mode
ON or OFF
• High Torque Mode
ON
Awake • High Power Mode
ON or OFF
• High Torque Mode
OFF
Using the thermal camera application
• On (default)
• Off
• On (default)
• Off
• On (default)
• Off
Single
Dual payload payload
22 W 17.4 W
8 W 7.4 W
13 W 13 W
8 W 7.4 W
30 W 19.4 W
20 W 16.5 W
227