Remote Control Connection; Pairing The Remote And Configuring The Up And Down Buttons - Raymarine a65 Installation And Operation Instructions Manual

23.1 Remote control connection

You can control the multifunction display wirelessly using a
Raymarine remote control unit.
The remote control uses a Bluetooth wireless connection.
1
1. Multifunction display.
2. Bluetooth connection.
3. Raymarine Bluetooth remote control (for example, RCU-3).
To use the remote control you must first:
• Enable Bluetooth in the System Settings on the multifunction
display.
• Pair the remote control unit with the multifunction display.
244
2 3
D12163-2
23.2 Pairing the remote and configuring
the UP and DOWN buttons
The remote control unit must be "paired" with the multifunction
display that you want to control. On your multifunction display, with
the homescreen displayed:
1. Select Set-up.
2. Select System Settings.
3. Select Wireless Connections.
4. Select Bluetooth > On.
5. Select New Bluetooth Connection.
A pop-up message will be displayed to confirm that the device
you are connecting to is discoverable.
6. Select Ok to confirm.
A list of discovered devices is displayed.
7. On your remote control unit, hold down the UP and DOWN
buttons together for 10 seconds.
8. Select the remote control unit in the list of devices.
9. When prompted, press the arrow button on your remote that you
wish to be configured as the UP button. The other arrow button
will automatically be configured as the DOWN button.
If the pairing was successful a "Pairing Success" message will
be displayed. If a "Pairing Failure" or "Pairing Timeout" message
is displayed, repeat steps 1 to 8.
New a Series / New c Series / New e Series