Menu item
Customizing your display
Description
• If you have a Raymarine GPS receiver using SeaTalk or
SeaTalk
ng
, it will automatically correlate each time you change
the datum on the multifunction display.
• If you have a Raymarine GPS receiver using NMEA 0183, or
a third-party GPS receiver, you must correlate it separately.
It may be possible to use your multifunction display to correlate
an NMEA 0183 GPS receiver. From the homescreen go to
Set-up > System settings > GPS Set-up > View Satellite
Status. If the datum version is displayed, it may be possible
to change it. From the homescreen go to Set-up > System
settings > Data Sources > GPS Datum.
Note: Raymarine recommends that you check the displayed
vessel position in the chart application against your actual
proximity to a known charted object. A typical GPS has an
accuracy of between 5 and 15 m.
Options
269