Fishfinder Presentation Options - Raymarine a65 Installation And Operation Instructions Manual

2. Select Sensitivity Settings.
3. Select Color Threshold.
Selecting color threshold displays the numeric adjust control.
4. Adjust the color threshold to the required setting.
5. Select Ok to confirm setting and close the numeric adjust control.
Fishfinder power
The power setting controls the power level of the transducer.
Power options:
• Auto. This is the default setting. When it is selected the sonar
module automatically determines the required power setting
based on the current depth, speed, and (bottom) signal strength. .
• Manual. If you wish to manually adjust the power to suit current
conditions, you can adjust the power level between 0% and
100%, in 10% increments. Lower power levels are normally used
in depth ranges less than 8 ft. (2.4 m) and higher power levels are
typically selected for depths greater than 12 ft. (3.7 m).
Setting the frequency for power mode
When connected to a Raymarine CHIRP sonar module, the
power mode for frequency 1 and frequency 2 can be changed
independently or both at the same time. If connected to a
non-CHIRP sonar module adjustments will be made to both
frequencies simultaneously.
1. Select Menu.
2. Select Sensitivity Settings.
3. Select Power Mode.
4. Select Adjust.
5. Select Frequency 1, Frequency 2 or Both.
Adjusting the fishfinder power
From the fishfinder application:
1. Select Menu.
2. Select Sensitivity settings.
3. Select Power Mode.
The power mode slider bar control is displayed.
4. Adjust the slider bar to the required setting, or
5. Select Auto to place power mode into automatic.
The new values remain set even when you switch off the display
and are applied to all fishfinder windows.
Using the fishfinder

15.15 Fishfinder presentation options

The Presentation menu gives you access to features and functions
which provide additional on-screen functionality.
Presentation options include:
Menu Item Description
Target Depth ID Controls whether the
depth of identified
targets are displayed.
The level of targets
displayed is directly
linked to the level of Fish
Alarm sensitivity.
Depth Lines Controls whether
horizontal lines
indicating depth are
displayed.
White Lines When set to On, this
option displays a white
line along the contour of
the seabed. This helps
to distinguish objects
close to the bottom.
Bottom Fill When set to On, this
option displays a solid
color fill for the seabed.
Various color palettes
Color Palette
are available to suit
different conditions
and your personal
preference.
Ping Rate Hyper Ping is a fishfinder
setting for use when
travelling at high speed
in shallow waters. When
set to Hyper the display
will provide an accurate,
undistorted image of the
bottom at speeds of up
to 40 kt.
Note: The ping rate
option is not available
when connected to
a Raymarine CHIRP
sonar module.
Specify the fishfinder
Scroll Speed
scroll speed.
Gain controls Controls whether or not
the on-screen Gain and
TVG controls are shown
or not
Note: Gain
controls setting
is only available
on touchscreen
multifunction
displays.
Data Overlay Set-up Allows you to set up and
display/hide up to 2 data
cells in the bottom left
corner of the screen:
• Data Cell 1
Options
• On
• Off
• On
• Off
• On
• Off
• On
• Off
• Classic Blue
• Classic Black
• Classic White
• Sunburst
• Greyscale
• Inverse Greyscale
• Copper
• Night Vision
• Normal
• Hyper
• 10% — 100%
• Show (default)
• Hide
Data Cell 1
• On
• Off
Select Data Category
185