Enabling Autopilot Functions; Enabling Ais Functions - Raymarine a65 Installation And Operation Instructions Manual

6.10 Enabling autopilot functions

With the homescreen displayed:
1. Select Set-up.
2. Select System Settings.
3. Select Autopilot Control so that On is highlighted.
Selecting Autopilot Control switches the control On and Off.
4. Select Backto return to the System Settings menu.
5. Select Pilot Controls.
If this menu option is disabled, no autopilot has been found.
Check the physical connections, then repeat steps 1 to 5 above.
6. The Pilot Control dialog is displayed, indicating that pilot control
is enabled and an autopilot is detected.
74

6.11 Enabling AIS functions

Before proceeding ensure your AIS unit is connected to NMEA
Port 1.
With the homescreen displayed:
1. Select Set-Up.
2. Select System Settings.
3. Select NMEA Set-Up.
4. Select NMEA Input Port 1.
5. Select the AIS 38400 option.
6. Select Back to return to the System Settings menu.
7. Select External Devices.
8. Select AIS Unit Set-up.
The AIS Unit Set-up menu is displayed.
9. Adjust the AIS options as appropriate.
New a Series / New c Series / New e Series