22.1 Media player connection
You can use your multifunction display to wirelessly control a
Bluetooth-compatible media player (such as a smartphone).
The media player must be compatible with the Bluetooth AVRCP
protocol (version 2.1 or higher).
1
1. Multifunction display.
2. Bluetooth connection.
3. Bluetooth-compatible media player.
To use this feature you must first:
• Enable Bluetooth in the System Settings on the multifunction
display.
• Enable Bluetooth on the media player device.
• Pair the media player device with the multifunction display.
• Enable Audio Control in the System Settings on the multifunction
display.
• Connect an RCU-3 remote and assign the shortcut key to
Start/Stop audio playback (Only required on a New c Series
display).
Note: If your media player does not include built-in speakers it
may be necessary to connect the media player's audio output
to an external audio system or a pair of headphones. For more
information refer to the instructions that accompany the media
player device.
238
2
3
D12164-2
22.2 Enabling Bluetooth
With the homescreen displayed:
1. Select Set-up.
2. Select System Settings.
3. Select Wireless Connections.
4. Select Bluetooth > On.
New a Series / New c Series / New e Series