System Data Troubleshooting - Raymarine a65 Installation And Operation Instructions Manual

27.7 System data troubleshooting

Aspects of the installation can cause problems with the data shared between connected equipment. Such problems, their possible
causes and solutions are described here.
Problem
Instrument, engine or other system data is
unavailable at all displays.
Instrument or other system data is missing
from some but not all displays.
280
Possible causes
Data is not being received at the display.
Data source (e.g ST70 instrument or
engine interface) is not operating.
Software mismatch between equipment
may prevent communication.
Network problem
Software mismatch between equipment
may prevent communication.
Possible solutions
Check the data bus (e.g. SeaTalk
Check the overall integrity of the data bus (e.g. SeaTalk
If available refer to the reference guide for the data bus. (e.g. SeaTalk
reference manual)
Check the source of the missing data (e.g. ST70 instrument or engine
interface).
Check the power to the SeaTalk bus.
Refer to the manufacturer's handbook for the equipment in question.
Contact Raymarine technical support.
Check that all required equipment is connected to the network..
Check the status of the Raymarine network Switch.
Check that SeaTalk hs / RayNet cables are free from damage.
Contact Raymarine technical support
ng ) wiring and connections.
ng ) wiring.
New a Series / New c Series / New e Series
ng