Raymarine a65 Installation And Operation Instructions Manual page 114

Adjusting chart range while building a route
From the Build Route menu:
1. Use the on-screen Range In and Range Out icons to range
in and out of the chart.
Build a route from a track
You can create a route from a recorded track.
When a track is converted the system creates the closest route
through the recorded track, using the minimum number of
waypoints. Each waypoint created will be saved with the depth and
temperature data (if applicable) for that position.
D11752-2
Note: If a track break occurs, only the last segment is converted
to a route.
Building a route from a track
From the Track List:
• accessed from the homescreen: My Data > Track List
• accessed from the chart application: Menu > My Data > Track
List
1. Select the Track you want to convert to a route.
The track options dialog is displayed.
2. Select Create Route From Track.
On completion, the maximum deviation of the route from the
recorded track is displayed in a dialog and the new route is
added to the route list. It can now be displayed, edited and
erased etc. in the same way as other routes in the system.
3. Select Ok to confirm.
4. Select Edit to change the name and line color of the created
route.
Building a route from a track displayed on the chart
From the chart application:
1. Select the required track.
The track context menu is displayed.
2. Select Create Route From Track.
On completion, the maximum deviation of the route from the
recorded track is displayed in a pop up message and the new
route is added to the route list. It can now be displayed, edited
and erased etc. in the same way as other routes in the system.
3. Select Ok to confirm.
4. Select Edit to change the name and line color of the created
route.
114
Route context menu
Placing the cursor over a route in the chart application displays a
context menu showing the leg of the route highlighted by the cursor
and menu items.
The context menu provides the following menu items:
• Follow Route
• Follow Route In Reverse
• Hide Route
• Insert Waypoint
• Edit Route
• Erase Route
• Add Route Leg
• Acquire Target (only available if Radar overlay is switched on.)
When following a route the context menu options change to:
• Stop Follow
• Restart XTE
• Advance Waypoint
• Insert Waypoint
• Edit Route
• Erase Route — Disabled
• Add Route Leg
• Acquire Target (only available if Radar overlay is switched on.)
Accessing the context menu
You can access the context menu by following the steps below.
1. New e Series or New c Series:
i. Selecting a location, object or target on-screen and pressing
the Ok button.
2. Touchscreen multifunction displays:
i. Selecting an object or target on-screen.
ii. Selecting and holding on a location on-screen.
Navigating a route
You can follow any route stored on the display. When following
a route you visit each waypoint in order. You may also use the
follow route options in conjunction with a compatible autopilot to
automatically navigate along your chosen route.
There are a number of ways to select the follow route option:
• Using a stored route within the route list.
• From a selected waypoint or any leg within a route.
New a Series / New c Series / New e Series
D11751-2