Navionics chartplotter sync connection
You can wirelessly synchronize waypoints and routes between the
multifunction display and a tablet or smartphone device.
1
1. Multifunction display.
2. Wi-Fi connection.
3. Tablet / smartphone.
4. Navionics Marine app.
To use this feature you must first:
• Download and install the Navionics Marine app, available from
the relevant app store.
• Enable Wi-Fi in the System Settings on the multifunction display.
• Enable Wi-Fi on your tablet / smartphone.
• Select the Raymarine Wi-Fi connection from the list of available
Wi-Fi networks on your tablet / smartphone.
Using the chart
2
3
4
D12166-2
12.2 Chart ranging and panning
Ranging in and out
The table below shows the Range controls available for each
display variant.
Rotary Control
Range in and Range
out buttons
Range in and Range
out on-screen icons
Panning the chart
You can pan the chart area on a touchscreen multifunction display
by following the steps below.
In the chart application:
1. Swipe your finger across the screen from right to left to pan right.
2. Swipe your finger across the screen from left to right to pan left.
3. Swipe your finger across the screen from top to bottom to pan up.
4. Swipe your finger across the screen from bottom to top to pan
down.
Panning the chart
You can pan the chart area on a non-touchscreen multifunction
display by following the steps below.
From the chart application:
1. Move the Joystick in the direction you want to pan.
• New c Series
• New e Series
• New c Series
• New e Series
(excluding e7 and
e7D
• New a Series
• New e Series
Note: New e
Series on-screen
range controls
can be enabled
and disabled from
the homescreen:
Customize >
Display Preferences
> Range Controls
121