Typical Systems - Raymarine a67 Wi-Fi Installation And Operation Instructions Manual
Raymarine new a/c/e series multifunction displays
Hide thumbs
Also See for a67 Wi-Fi:
- Installation and operation instructions manual (464 pages) ,
- Operation instructions manual (390 pages) ,
- Installation and operation instructions manual (354 pages)
Table of Contents
Advertisement
3.7 Typical systems
The illustrations below show examples of possible system configurations, for more details on compatible devices please refer to the
System integration section.
Note: In the examples below the multifunction display(s) could be any of the following:
• New a Series
• New c Series
• New e Series
Example: Basic system
1
hs
SeaTalk
/ RayNet
1. Raymarine Multifunction display.
2. Raymarine network switch.
3. Raymarine radar scanner.
4. SPX course computer.
5. SeaTalk
ng
Pilot controller.
Note: A network switch is only required if multiple devices are connected using SeaTalk
Example: Basic system with SeaTalk equipment
1
hs
SeaT alk
/ RayNet
1. Multifunction display
2. Network switch.
3. Radar scanner.
4. SPX course computer.
5. SeaTalk pilot controller.
6. SeaTalk to SeaTalk
ng
converter.
Note: A network switch is only required if more than one device is connected using SeaTalk
Planning the installation
2
hs
SeaT alk
/ RayNet
SeaT alk
2
hs
SeaT alk
/ RayNet
SeaT alk
3
ng
hs
/ RayNet.
3
ng
hs
4
SMART
4
5
SMART
6
/ RayNet.
5
D12245-2
D12246-2
29
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the a67 Wi-Fi and is the answer not in the manual?
Questions and answers
Im looking for a tranducer that directly connects to the e127 e70024 I got the a80270 pins are different
The Raymarine e127 (e70024) can use a Minn Kota sonar transducer when connected via the appropriate adaptor cable. To connect a Minn Kota transducer to a compatible Raymarine multifunction display like the e127, use the 0.5m (1.64 ft) transducer adaptor cable part number E66066. The a67 Wi-Fi is not mentioned as directly compatible with this transducer connection.
This answer is automatically generated