Display Power; New A Series Controls - Raymarine a65 Installation And Operation Instructions Manual

6.1 Display power

Powering the display on
1. Press and hold the POWER button until the Raymarine logo
appears.
2. Select Accept to acknowledge the disclaimer message.
Powering the display on
1. Press and hold the POWER button until the Raymarine logo
appears.
2. Press the OK button to accept the disclaimer message.
Powering the display off
1. Press and hold the POWER button until the countdown reaches
zero.
Note: If the POWER button is released before the countdown
reaches zero, the power off is cancelled.
Standby (PowerSave) mode
In PowerSave mode all functions of the multifunction display remain
active, but the unit is placed into a low power state. The LED lights
around the Rotary controller will blink once every 1.5 seconds to
indicate that the unit is in PowerSave mode. PowerSave mode is
cancelled by pressing a physical button or when an alarm event
occurs.
Note: To ensure user safety the PowerSave feature will not be
available if any connected radars are switched on.
Enabling PowerSave mode
To enable PowerSave mode follow the steps below.
1. Ensure any radars connected to the system are switched off.
2. Press the POWER button.
The shortcuts menu is displayed.
3. Select PowerSave Mode.
The multifunction displays is now in PowerSave mode.
4. You can wake the unit from PowerSave mode at anytime by
pressing a physical button on the multifunction display.
Note: PowerSave mode is automatically cancelled if an alarm
event occurs.
66

6.2 New a Series Controls

1
2
1. Touchscreen — touch the screen to operate functions,
including all menu operations.
2. Power — press once to switch the unit ON. Once powered on,
press the Power button again to adjust the brightness, perform
a screen capture, access Powersave mode or access the power
controls for external devices. Press and hold to switch the unit
OFF.
3. Chart card slot — open the card door to insert or remove an
MicroSD card. There is 1 card slot, used for electronic charts
and archiving waypoint, route and track data.
D12367-1
New a Series / New c Series / New e Series
D12577-1