Lbb4115/00 Tap-Off Unit; Lbb4116 Extension Cables - Bosch DCN Next Generation Installation And Operation Manual

Conference System
3.29

LBB4115/00 Tap-off unit

Use the LBB4115/00 Protected Trunk Splitter to make tap-offs in the DCN that have
protection against short-circuits. Typically, the LBB4115/00 Protected Trunk Splitters are
used to connect DCN-IDESK Interpreter Desks to the system.
The differences between the LBB4114/00 Trunk Splitter and the LBB4115/00 Protected Trunk
Splitter are that the DCN tap-off sockets of the LBB4115/00 Protected Trunk Splitter:
–
–
The following sections give more information about the mentioned subject:
–
–
–
3.30

LBB4116 Extension Cables

The following extension cable (assembly) products are available:
Type number
LBB4116/02
LBB4116/05
LBB4116/10
LBB4116/15
LBB4116/20
LBB4116/25
LBB4116/00
Table 3.5 Extension cables
Except for LBB4116/00, all extension cables have DCN plugs and sockets.
Connectors
Make custom-made cables with the LBB4116/00 Extension Cable (100 m) and the LBB4119/
00 DCN Connectors (refer to Section 3.28 LBB4114/00 Trunk Splitter).
Figure 3.57 LBB4119/00 DCN connectors
Refer to Section 11.2.30 LBB4116 Extension Cables for more information.
Bosch Security Systems B.V.
Each output has a maximum load of 4.5 W
Trunk and tap-off outlets are protected against short-circuits.
Installation: Section 5.10 LBB4115/00 Tap-off unit.
Connection: Section 6.23 LBB4115/00 Tap-off unit.
Technical Data: Section 11.2.29 LBB4115/00 Tap-off unit.
Cable length
2 m
5 m
10 m
15 m
20 m
25 m
100 m
Plug
Socket
Installation and Operation manual
System Overview | en
DCN-NG_IOM_V4.1 | V1.3 | 2012.07
57