Dcn-Wap Wireless Access Point - Bosch DCN Next Generation Installation And Operation Manual

Conference System
To open the online help:
–
–
7.9

DCN-WAP Wireless Access Point

Use the configuration menu of the central control unit to configure the wireless access point.
System ID
NOTICE!
Set the correct system identity before you do the installation of the system (refer to
Section 7.1.2 Initialization). When you change the system identity after you did the
initialization, you must do the initialization again.
Set the system identity with the 8J menu item. Adjacent systems must have different system
identities and different carriers.
8J CCU Mode
12-01 Standalone
8J CCU Mode
03-01 Standalone
Figure 7.12 System IDs for adjacent systems
Carrier
Set the carrier of the wireless access point with the 8Fb WAP menu item. Adjacent systems
must have different carriers and different system identities.
NOTICE!
If adjacent systems are using the same carrier, they must be separated by a minimum distance
of 500 m.
Bosch Security Systems B.V.
Push the F1 function button on the PC keyboard on which the CNConfig is installed.
Go to X:\Program Files\Bosch\CNConfig and double-click with the left mouse button on
CNConfig.chm. (X is the letter of the harddisk.).
Installation and Operation manual
8J CCU Mode
08-01 Standalone
Configuration | en 203
DCN-NG_IOM_V4.1 | V1.3 | 2012.07