Bosch DCN Next Generation Installation And Operation Manual page 111

Conference System
5.9 LBB4114/00 Trunk Splitter
You can install the trunk splitter on a flat surface. Use the lid of the trunk splitter to fix the
DCN cables.
Figure 5.27 Installation
5.10 LBB4115/00 Tap-off unit
Refer to Section 5.9 LBB4114/00 Trunk Splitterfor information about the installation of the
LBB4115/00 Protected Trunk Splitter. The procedures to install the LBB4114/00 Trunk
Splitter and the LBB4115/00 Protected Trunk Splitter are the same.
5.11 PRS-NSP Network Splitter
You can attach the network splitter to a flat surface with a bracket. The distance (d) is 40 mm.
Figure 5.28 Installation
Push the sides of the unit to attach or remove the unit from the bracket.
5.12 PRS-FINNA Fiber Interface
Refer to Section 5.11 PRS-NSP Network Splitter for information about the installation of the
fiber interface. The procedures to install the network splitter and the fiber interface are the
same.
Bosch Security Systems B.V. Installation and Operation manual
Installation | en 111
DCN-NG_IOM_V4.1 | V1.3 | 2012.07