Bosch DCN Next Generation Installation And Operation Manual page 185

Conference System
Defaults
Use the 8N Defaults sub-menu to set all parameters to the default values in the configuration
menu.
Menu item
8N Defaults
Table 7.15 Defaults sub-menu (* = default)
Bosch Security Systems B.V.
Parameter Value
Reset to No*
defaults? Yes
Installation and Operation manual
Configuration | en 185
Description
Does not put back the default
values.
Sets all parameters to the
default values. This includes the
values of the parameters of the
interpreter desks, the IP
settings and Unit/Hostname.
The CCU is also restarted.
DCN-NG_IOM_V4.1 | V1.3 | 2012.07