Dcn-Con Concentus Units - Bosch DCN Next Generation Installation And Operation Manual

Conference System
7.10

DCN-CON Concentus Units

Restore channel function
Use the S300 solder spot to enable or disable the restore channel function of the channel
selector of the Concentus unit.
NOTICE!
The DCN-CON does not have a channel selector.
Solder spot
Not soldered*
Soldered
Table 7.24 Solder spot S300 (* = default)
For example, you can enable this function when all delegates and chairmen have a fixed seat
number.
NOTICE!
The Concentus unit saves all channel changes after 5 seconds.
NOTICE!
When the last know channel number is greater than the maximum number of channels that are
available, the channel selector automatically goes to channel 0. When the last known channel
becomes available, it is only restored when you did not operate the buttons of the channel
selector.
Auto standby function
Use the S302 solder spot to enable or disable the auto standby function of the channel
selector of the Concentus unit.
NOTICE!
The DCN-CON does not have a channel selector.
Solder spot
Not soldered*
Soldered
Table 7.25 Solder spot S302 (* = default)
The Concentus unit detects the presence of the headphones with a switch inside the
headphones socket. When the headphones are connected, the switch is closed.
Headphones level reduction
Use the S303 solder spot to enable or disable the headphones level reduction of the
headphones that are connected to the Concentus unit.
Bosch Security Systems B.V.
Description
The restore channel function is disabled. When the channel
selector is enabled, it automatically selects channel 0 (the floor)
The restore channel function is enabled. When the channel
selector is enabled, it automatically selects last known channel.
Description
The auto standby function is enabled. When the headphones are
disconnected, the channel selector is disabled.
The auto standby function is disabled. When the headphones are
disconnected, the channel selector remains enabled.
Installation and Operation manual
Configuration | en 205
DCN-NG_IOM_V4.1 | V1.3 | 2012.07