Dcn-Ccu2 And Dcn-Ccub2 Central Control Units - Bosch DCN Next Generation Installation And Operation Manual

Conference System
3.1

DCN-CCU2 and DCN-CCUB2 Central Control Units

The Central Control Unit controls the system. The Central Control Unit can operate with or
without a control PC.
Figure 3.2 Front and rear view of CCU2
The front of the central control unit contains:
1.
2.
3.
4.
The rear of the central control unit contains:
5.
6.
7.
8.
9.
10. Ethernet socket - Connects the central control unit (DCN-CCU2) to the PC, remote
11. RS232 - Connects video cameras to the central control unit.
Bosch Security Systems B.V.
1
5
1
15 14 13
On/off switch - Power on or off the central control unit.
Display - Shows the configuration menu.
Knob - Operates the configuration menu and the volume level of the system.
Headphones socket - Headphone connection.
Audio inputs - Connect the central control unit to external analog audio sources. The
functions of the audio inputs are:
– Audio input 1: Floor
Audio input 2: Selectable recorder/delegate loudspeaker/ mix-minus/insertion.
Interpreter floor insertion/local floor.
Audio outputs - Connect the central control unit to external analog audio devices. The
functions of the audio outputs are:
– Audio output 1: PA
Audio output 2: Selectable recorder/delegate loudspeaker/ mix-minus/insertion.
Interpreter floor insertion/local floor.
Power inlet - Connects the central control unit to the mains power supply with a power
cable.
Ground screw - Connects the central control unit to ground.
Fuse holder - Prevents damage to the internal power supply unit of the central control
unit.
controller or in a multi CCU system to the master central control unit.
Installation and Operation manual
2
6 5 6
2 3
12 11 10
System Overview | en
3 4
7
9
DCN-NG_IOM_V4.1 | V1.3 | 2012.07
15
8