186 en | Configuration
7.4
LBB4402/00 Audio Expander
Overview
Use the configuration menu of the audio expander to configure the audio expander.
Figure 7.3 Configuration menu
NOTICE!
When the interlock is None (refer to Section Menu screens, page 221), the audio inputs of the
audio expander are disabled for translation channels only. Audio input channels can route to
floor channels.
Setup
Use the 4 Setup menu item to open the Setup sub-menu. Use the menu items in this sub-menu
to configure the audio expander.
NOTICE!
To open the Setup sub-menu, you must push and hold the knob for more than 3 seconds.
DCN-NG_IOM_V4.1 | V1.3 | 2012.07
Main
Fault Status
1
2A
Monitoring
2
3A
Enquiry
3
4A
Setup
4
Back
<
Installation and Operation manual
2B Engaged Status
Source/Volume
3C FW Version
4F Unit Name
3B
HW Version
4E Contact Thresholds
Serial Number
4D Routing
4C Level
4B
AGC
Input Mode
Conference System
Menu item
Menu item with sub-menu
4G Reset
Bosch Security Systems B.V.