Stop The System - Bosch DCN Next Generation Installation And Operation Manual

230 en | Operation
8.1.2

Stop the system

To stop the system, do the following:
1.
2.
3.
NOTICE!
If necessary, charge the battery packs. Refer to Section 10.3 DCN-WLIION Battery Pack.
8.2 DCN-CCU2 and DCN-CCUB2 Central Control Units
Main screen
When you start the central control unit, the display first shows "Starting". The display then
shows the main screen.
Standalone mode
The following screen is displayed:
The main screen shows:
–
–
–
–
You can turn the knob to change the volume level.
Single CCU mode
The following screen is displayed:
The main screen shows:
–
–
–
–
–
–
Turn the knob to change the volume level.
DCN-NG_IOM_V4.1 | V1.3 | 2012.07
Select the 4A Wireless Mode menu item of the configuration menu of the central control
unit.
Set the value of the parameter in the menu item to Off. All wireless discussion units are
deactivated.
Push the on/off switch of the central control unit. The display goes off. All devices in the
DCN and the optical network are deactivated.
The unit name. The default name is CCU plus the serial number. Change the name with
the 8M Unit/Hostname menu item.
The volume setting in dB (-13 dB).
The system mode. PC - when the PC control software is connected to the central control
unit.
An indicator that shows the volume level of the loudspeakers of the contribution devices.
The unit name. The default name is CCU plus the serial number. You can change the
name with the 8M Unit/Hostname menu item.
The System ID (00 - 15).
The Slave ID (02 - 30).
The volume setting in dB (-13 dB).
The system mode. PC - when the PC control software is connected to the central control
unit.
An indicator that shows the volume level of the loudspeakers of the contribution devices.
Installation and Operation manual
Conference System
Bosch Security Systems B.V.